ESTOL-Contact Adhesive N
Application
Joins all connection seams in asphalt surfaces and landfill construction. Creates watertight and voltage by-passing connections between old surface layers and new layers that are to be constructed.
 

Properties

ESTOL Contact Adhesive N comes ready-to-use in a container and is cold workable.
ESTOL-Contact Adhesive N - fibre-free - has a relatively low viscosity and can easily penetrate into the pores of corners and interfaces.
The usage of ESTOL-Contact Adhesive N is approx. 15 g/m and cm cutting edge height.
ESTOL-Contact Adhesive N is a safe and economic alternative to joint tape.
The water impermeability is confirmed by the IFM-Rottweil test certificate.
The material withstands tensile stress.
Milling edges are securely sealed with ESTOL-Contact Adhesive N.

Installation

ESTOL-Contact Adhesive D does not have to be stirred before use.
Seam edges should be dry and mostly dust-free. Prime with ESTOL-Primer if necessary.
ESTOL-Contact Adhesive N can be poured onto the attachment edge and spread using a paintbrush, a wide or regular brush.
After a ventilation period of about 15 minutes the hot mix can be paved on.

Supply/Storage

ESTOL-Contact Adhesive N is available in 25 kg containers. 16 containers are packed onto one pallet.
ESTOL-Contact Adhesive N can be stored up to one year in its unopened original container. Do not place the container in direct sunlight. Store indoors in a cool, dry place; do not store outside.
We are happy to send you a free, no-obligation quote and our technical data sheets. These data sheets will provide you with more data and information about how our products are processed.

Download